IP65 Epoxy LED Emergency Conversion Kits Outdoor Emergency Drives

IP65 Epoxy LED Emergency Conversion Kits apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purpose.

Emergency lighting solution provded “charging”, “discharging” functions, use intellgent IC controlling circuit, according to be high exchange efficiency and smaller battery capacity.

Internal Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self maintenance when fully charged,according to enlonger the battery’s lifespan

Emergency driver will be back up the lighting luminaires within 3 seconds when AC grid electricity stopped, to be sure the light can be working 1 to 3hrs normally.

Categories: ,

This waterproof LED Emergency Conversion Kits KVD188M model is an energy-saving emergency solution for an LED lighting fixture, we have an 11.1v battery pack. The KVD188M emergency driver supports an LED light powered at 20w-200w, IP65 waterproof emergency drive for outdoor light fixtures

The waterproof LED Emergency light fits LED panel light, LED high bay light, LED mining light, LED downlight, LED flood light, LED Ceiling Light, and tri-proof light.

200w IP65 Epoxy LED Emergency Conversion Kits specifications:
1. Emergency Power: 10W/15W/22W
2. Lighting fixture Power: 20W-200w
3. Conversion Efficiency: ≥95%
4. Battery Type: Li-ion battery
5. Emergency duration time: 1.5-5hrs（can be customized based on your needs）
6. Input Voltage: AC220-240V
7. Output Voltage: DC20-85V
8. Charging Time: 24 hours
9. Working Lifetime: 30000 hours
10. 2 years warranty.
11. Best quality and factory price

LED IP65 Epoxy LED Emergency Conversion Kits Features

The aluminum housing box outside, which covers the emergency driver and battery pack, is filled with waterproof glue making it 100% IP65 waterproof.
Heavy and durable boxes can be buried under the ground even, and have very good heat radiation.
There are indicators at the side, and they can also be connected with a remote control button for testing.
Automatically turns on LED lighting when there is a main power failure.
The led emergency driver battery backup with overcharge and discharge protection, output short protection, overload protection, over-temperature protection
With indicator: Green=Main Circuit, Red=Charging.
Each led emergency driver is passed a 100% full power load aging test, CE Rosh certified.

Working Environment Attention

Working & storage temperature: -10℃–+45℃（Standard temperature 28℃）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on from long

Related products