Emergency Conversion Kits KVD188D-EM30 for 5W-30W LED Lihgt LED Emergency Driver

KVD188D-EM30
Full Power Emergency Conversion Kits apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purposes.

Emergency lighting solutions provided “charging”, and “discharging” functions, and use intelligent IC controlling circuits, according to be high exchange efficiency and smaller battery capacity.

Internal Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self-maintenance when fully charged, according to longer the battery’s lifespan

The emergency ballast driver will be back up the lighting luminaires within 3 seconds when AC grid electricity stopped, to be sure the light can be working for 1 to 3hrs normally.

Categories: , ,

Full Power Emergency Conversion Kits KVD188D-EM30 for 5W-30W LED Lihgt LED Emergency Driver

This is an LED full power emergency light battery drive kit for indoor use, a lighting emergency solution, but the LED tube can only use a 100% full power LED emergency driver. If you are looking for an Emergency Ballast kit for LED lights, please click here

Battery-operated LED Full Power Emergency Light Battery Pack specifications
1. Emergency Power: 5W-30W
2. Lighting fixture Power: 5W-30W
3. Conversion Efficiency: ≥95%
4. Battery Type: Li-ion battery
5. Emergency duration time: 1.5 hours or 3 hours (can be customized)
6. Input Voltage: AC100-277V
7. Output Voltage: DC185-280V
8. Charging Time: 24 hours
9. Product Weight: based on the battery capacity
10. Working Lifetime(Hour)30000
11. 2 years warranty.
12. Best quality and factory price

Full Power emergency light module Features

  • Built with a compact Li-ion battery whose capacity can be customized for a specific emergency hour
    metal casing
    Automatically turns on LED lighting when there is a main power failure
    The led emergency driver battery backup with overcharge and discharge protection, output short protection, overload protection, over-temperature protection
    With indicator: Green=Main Circuit, Red=Charging
    Each led Emergency Conversion Kits are passed a 100% full power load aging test, CE Rosh certified

Working Environment Attention

Working & storage temperature: -10℃–+45℃（Standard temperature 28℃）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency light battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching it on for a long time usage.

Related products