LED Emergency Driver Battery Backup for 10W-70W Panel Lights KVD188B-EM08 Emergency Conversion Kits

KVD188B-EM08 Emergency Conversion Kits apply in Led constant current lighting luminaires’ normal lighting or emergency lighting mode, also can be only for emergency lighting purposes.

Emergency lighting solutions provided “charging”, and “discharging” functions, and use intelligent IC controlling circuits, according to be high exchange efficiency and smaller battery capacity.

Internal Li-ion battery, compatible with dimming or non-dimming led luminaire, external installation, emergency supply will be standing and charging by when AC grid electricity supply in normal, will be going to self-maintenance when fully charged, according to longer the battery’s lifespan

The emergency driver will be back up the lighting luminaires within 3 seconds when AC grid electricity stopped, to be sure the light can be working for 1 to 3hrs normally.

Categories: , ,

LED Emergency Driver Battery Backup for 10W-70W Panel Lights KVD188B-EM08 Emergency Conversion Kits

This is an LED emergency light battery driver kit for indoor use, lighting emergency solution, and LED emergency lights with an external driver, but the LED tube can only use a 100% full power Emergency led driver. If you are looking for an emergency light module for LED lights, please click here

LED Emergency Battery Backup specifications:
1. Emergency Power: 4W 6W 8W
2. Lighting fixture Power: 10W-70w
3. Conversion Efficiency: ≥95%
4. Battery Type: 2 pcs Li-ion battery inside
5. Emergency duration time: 1.5 hours with 2000 mAh Li-ion battery or 3 hours with 3000 mAh Li-ion battery
6. Input Voltage: AC100-277V
7. Output Voltage: DC20V-80V
8. Charging Time: 24 hours
9. Product Weight: 2000mAh Li-ion battery-230g 3000mAh Li-ion battery-250g
10. Working Lifetime(Hour)30000
11. 2 years warranty.
12. Best quality and factory price

led emergency light battery pack Features

  • 100% constant power.
  • Automatically turns on LED lighting when there is a main power failure.
  • The led emergency driver battery backup with overcharge and discharge protection, output short protection, overload protection, over temperature protection
  • With indicator: Green=Main Circuit, Red=Charging.
  • Each emergency Led driver are passed 100% full power load aging test, CE Rosh certified.

Working Environment Attention

Working & storage temperature: -10℃–+45℃（Standard temperature 28℃）
To ensure a longer lifetime, an LED emergency battery is needed to be charged and discharged every 3 months.
If stored longer than 3 months in the warehouse, an emergency light battery is needed to be charged and discharged every 3 months.
Our emergency batteries can be charged/discharged 500 cycles if used in the right way.
Please make sure the wire connection is correct before switching on for long time usage.

Related products